Fox | Hydro Pneumatic | Pulsation Dampener | Bladder

Fox เป็นผู้ผลิตอุปกรณ์ (Pulsation dampener or bladder) เพื่อควบคุมความดันในท่อหรือกระบวบการผลิตไม่ให้ความดันเกิดการกระตุกขึ้นลง หรือความดันไม่เสถียร เช่นทางออกของปั๊มแบบลูกสูบ หรือคอมเพรสเซอร์ อันจะส่งผลให้การควบคุมกระบวนการผลิตเสียหายโดย โดยใช้หลักการของ hydro pneumatic หรือ bladder เพื่อสะสมพลังงาน ทำให้ความดันค่อนข้างจะคงที่ หรือเสถียร การออกแบบเป็นไปตามมาตรฐานอุตสาหกรรม การใช้งานใช้ในโรงงานอุตสาหกรรมทั่วไปเช่น โรงไฟฟ้า,โรงกลั่นน้ำมัน, โรงปิโตรเคมี, โรงเคมี, โรงงานกระดาษและเยื่อกระดาษ, โรงงานอาหาร เป็นต้น

Fox is Italian manufacturer provide hydro pneumatic pulsation dampener and bladder to reduce pulsation fluid flow in reciprocating pump and compressor in oil and gas, refinery, petrochemical, chemical, power, pulse and paper, food,…etc. industries

Fox Srl. provide pulsation dampener, bladder, hydro-pneumatic accumulator, energy accumulator, leak compensator, water hammer absorber, calibration pot and electro-hydraulic instrument. Pulsation dampener use to reduce pulsation fluid flow in reciprocating pump and compressor in oil and gas, refinery, petrochemical, chemical, power, pulse and paper, food,…etc. industries

Bladder Type


 

fox bladder type hgv

HGV

Pulsation dampers for low maintenance vacuum bag with nitrogen accessible from above. Made of carbon steel, AISI 316 stainless steel, duplex and super duplex made of welded construction. They are built with dimensions and maximum pressures on the plant-specific.

bladder type hg

HG

Bladder type hydro pneumatic accumulators, made of carbon steel or stainless steel AISI 304L/316L, welded construction. The advantage of this series is the simplicity of the bladder replacement through the disassemble of the top flange.

inox steel type htrx

HTRX series

Hydropneumatic bladder accumulator with stainless steel body AISI316L in welded execution. The HTRX series is suitable for the use with water and with the aggressive fluids used on the alimentary, chemical, pharmaceutical and petrochemical sectors.

inox steel type acsx

ACSX series

Bladder type hydropneumatic accumulators with body in AISI 316L stainless steel

inox steel type hstx 150 210 series

HSTX / 150-210 series

Accumulator in AISI 316 L stainless steel by two different parts united with a special threading that under condition of dynami c pressure tends to self-block. Available special execution for maximum working pressure further 500 bar.

inox steel type bthx btrx

 

 

BTHX series

Accumulator in AISI 316 L stainless steel with a diaphragm in PTFE for work with every kind of fluids. Available in two different versions for high pressure (BTHX) and for low pressure (BTHX) Also available with body in PVC

inox steel type bhp

BHP

The BHP damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure pulsations into the system. It is suitable for every hydraulic connection, it provides a wide range of volumes up to 5.000 L and customizable size depending on the application. Volume depends on the working parameters and the required residual pulsation. His main application is the damping of pulsations on delivery side of alternative plunger pumps.

inox steel type hgvs

HGVS

The HGVS damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure pulsations into the system. It is suitable for every hydraulic connection, it provides a wide...


 

pvc polypropylene hst pvc series

HST-PVC series

Accumulator in PVC or Polipropilene made by two different parts joined with a special threading that under condition of dynamic pressure tends to self - block. Also available for maximum working pressure 15[bar]