GVR POMPE

Gear pumps are used to pump lubricant and viscous liquids without any suspended and solid substance.

Some areas of application are:

  • Mechanical and Iron and Steel Industry
  • Food Industry
  • Building Industry
  • Chemical Industry

BMF - BCF

Close couple gear pumps.

Application

  • Pumps for lubricant liquids without any suspended solid or abrasive substance.
  • Max temperature of 100 °C for standard version.
  • Max viscosity of 300 cSt for 4-poles-version and 600 cSt for 6-poles-version.
  • Max pressure 10 Bar.

BFC

Gear pumps with bell housing.

Application

  • Pumps for lubricant liquids without any suspended solid or abrasive substance.
  • Max temperature of 100 °C for standard version.
  • Max pressure 10 Bar.

B

Bare shaft gear pumps.

Application

  • Pumps for lubricant and viscous liquids without any suspended solid or abrasive substance.
  • Max temperature of 100 °C for standard version with mechanical seal or lip seal.
  • Max temperature of 180 °C for standard version with packing seal.
  • Max pressure of 10 BAR.

MBM

Gear pumps mounted on base plate.

Application

  • Pumps for lubricant and viscous liquids without any suspended solid or abrasive substance.
  • Max temperature of 100 °C for standard version with mechanical seal or lip seal.
  • Max temperature of 180 °C for standard version with packing seal.
  • Max pressure of 10 BAR.

BC

Bare shaft gear pumps with heating chamber.

Application

  • Pumps for lubricant and viscous liquids without any suspended solid or abrasive substance.
  • Pumps for very thick liquids as glue, bitumen, resin or any liquid that must be heated in order to not solidify.
  • Max temperature of 100 °C for standard version with mechanical seal or lip seal.
  • Max temperature of 180 °C for standard version with packing seal.
  • Max pressure of 10 BAR.

MBMC

Gear pumps with heating chamber mounted on base plate.

Application

  • Pumps for lubricant and viscous liquids without any suspended solid or abrasive substance.
  • Pumps for very thick liquids as glue, bitumen, resin or any liquids that must be heated in order to not solidify.
  • Max temperature of 100 °C for standard version with mechanical seal or lip seal.
  • Max temperature of 180 °C for standard version with packing seal.
  • Max pressure of 10 BAR.

APF

Flanged gear pumps

Application

  • Pumps for lubricant liquids without any suspended solid or abrasive substance.
  • Max temperature of 100 °C for standard version.
  • Max pressure 20 Bar.

IF

Gear pumps fow low viscosity.

Application

  • Pumps for lubricant liquids with viscosity similar to water without any suspended solid or abrasive substance.
  • Pumps suitable for pumping: cosmetic products, foodstuffs, solvents and derivatives, water solutions, acid and basic solutions.
  • Max temperature of 100 °C for standard version.
  • Max pressure 20 Bar.